Experimental and Statistical Evaluation of the SEN0193 Capacitive Sensor for Moisture Measurement in Granular Materials

Authors

  • I. Diaz-Peña. I. Diaz-Peña. División de Estudios de Posgrado e Investigación, Tecnológico Nacional de México, Instituto Tecnológico de Culiacán. Culiacán 80220. México. Author
  • J.J. Hermosillo-Nevárez. J.J. Hermosillo-Nevárez. Universidad Autónoma de Occidente-Unidad Regional Culiacán. 80020. Culiacán, Sinaloa, México. Author
  • A.L. Félix-Sámano. A.L. Félix-Sámano. División de Estudios de Posgrado e Investigación, Tecnológico Nacional de México, Instituto Tecnológico de Culiacán. Culiacán 80220. México. Author
  • A.A. Zaldívar-Cadena. A.A. Zaldívar-Cadena. Universidad Autónoma de Nuevo León, Facultad de Ingeniería Civil, Av. Universidad s/n, Cd. Universitaria, 66455, San Nicolás de los Garza, N.L., México. Author
  • J.R. Castro-Rubio. J.R. Castro-Rubio. División de Estudios de Posgrado e Investigación, Tecnológico Nacional de México, Instituto Tecnológico de Culiacán. Culiacán 80220. México. Author
  • J.V. Félix-Medina. J.V. Félix-Medina. División de Estudios de Posgrado e Investigación, Tecnológico Nacional de México, Instituto Tecnológico de Culiacán. Culiacán 80220. México. Author

Keywords:

SEN0193 sensor, moisture measurement, granulometry test, ASTM D1241.

Abstract

This study presents a methodology for the experimental and statistical evaluation of low-cost capacitive sensors (SEN0193) for moisture measurement in granular media under controlled laboratory conditions. Ten sensors were used to measure the moisture content of a granular material characterized by particle size distribution in accordance with ASTM D1241. Moisture content was systematically varied across seven levels (0, 5, 10, 15, 20, 25, and 30 %), with 10,000 measurements per moisture level (a total N of 70,000) acquired through a data acquisition system. The analysis focused on characterizing the sensor response as a function of gravimetric water content (GWC), assessing its repeatability and stability under controlled soil–water ratio conditions. Statistical analysis included multiple normality tests (Shapiro–Wilk, Anderson–Darling, Lilliefors, Jarque–Bera, and D'Agostino), as well as descriptive statistics such as the mean, standard deviation, and coefficient of variation. The results show low dispersion in the measurements (CV < 1%), indicating high repeatability and consistency among the sensors. Two fitting models were developed: a fourth-order polynomial model for empirical fitting and an exponential model to describe the nonlinear behavior of the signal as a function of moisture. Both models exhibited a high degree of fit to the experimental data within the evaluated range, although the exponential model demonstrated greater consistency with the expected system behavior. The results indicate that the sensor response exhibits a nonlinear relationship with moisture content, consistent with the nature of capacitive sensing. Under the experimental conditions, stable and reproducible performance of the measurement system was observed. This work demonstrates the feasibility of low-cost capacitive sensors for moisture measurement in granular media under controlled conditions, highlighting their high repeatability, which may help complement the results of conventional techniques that typically entail greater time, effort, cost, and labor requirements.

References

Das, B. M. (2010). Principles of geotechnical engineering (7.ª ed.). Cengage Learning.

ASTM International. (2007). Standard test methods for laboratory compaction characteristics of soil using standard effort (ASTM D698).

American Association of State Highway and Transportation Officials. (1995a). Moisture-density relations of soils using a 4.54-kg (10-lb) rammer and a 457-mm (18-in.) drop (AASHTO T 180).

American Association of State Highway and Transportation Officials. (1995b). Standard method of test for moisture-density relations of soils using a 2.5-kg (5.5-lb) rammer and a 305-mm (12-in.) drop (AASHTO T 99).

Secretaría de Comunicaciones y Transportes. (2003). Manual MMP: Métodos de muestreo y prueba de materiales. Parte 1: Suelos y materiales para terracerías.

Contreras Ferreyra, D. U., Chávez Negrete, C., & Pastor Gómez, N. (2024). Utilization of low-cost water content sensors in compaction tests. Ingeniería Investigación y Tecnología, 25(3), 1–7. https://doi.org/10.22201/fi.25940732e.2024.25.3.020

Vaz, C. M. P., Jones, S., Meding, M., & Tuller, M. (2013). Evaluation of standard calibration functions for eight electromagnetic soil moisture sensors. Vadose Zone Journal, 12(2), 1–16. https://doi.org/10.2136/vzj2012.0160

Abdelmoneim, A. A., Al Kalaany, C. M., Khadra, R., Derardja, B., & Dragonetti, G. (2025). Calibration of low-cost capacitive soil moisture sensors for irrigation management applications. Sensors, 25(2), 343. https://doi.org/10.3390/s25020343

Placidi, P., Gasperini, L., Grassi, A., Cecconi, M., & Scorzoni, A. (2020). Characterization of low-cost capacitive soil moisture sensors for IoT networks. Sensors, 20(12), 3585. https://doi.org/10.3390/s20123585

Adla, S., Rai, N. K., Karumanchi, S. H., Tripathi, S., Disse, M., & Pande, S. (2020). Laboratory calibration and performance evaluation of low-cost capacitive and very low-cost resistive soil moisture sensors. Sensors, 20(2), 363. https://doi.org/10.3390/s20020363

Hidayat, M. N., Hazarika, H., & Kanaya, H. (2024). Calibration and performance evaluation of cost-effective capacitive moisture sensor in slope model experiments. Sensors, 24(24), 8156. https://doi.org/10.3390/s24248156

Fernandes Genovez, J. G., Gripp, A. R., Pinto Duque, A. C. L., Felix, R. W., Esteves, F. A., & Martins, R. L. (2025). Enhancing the accuracy of the low-cost capacitive soil moisture sensor SEN0193 for Internet of Things applications. Brazilian Archives of Biology and Technology, 68. https://doi.org/10.1590/1678-4324-2025240380

Radi, Murtiningrum, Ngadisih, Muzdrikah, F. S., Nuha, M. S., & Rizqi, F. A. (2018). Calibration of capacitive soil moisture sensor (SKU:SEN0193). En 2018 4th International Conference on Science and Technology (ICST) (pp. 1–6). IEEE. https://doi.org/10.1109/ICSTC.2018.8528624

Pereira, R. M., Sandri, D., & da Silva Júnior, J. J. (2022). Evaluation of low-cost capacitive moisture sensors in three types of soils in the Cerrado, Brazil. Revista Engenharia na Agricultura, 30, 262–272. https://doi.org/10.13083/reveng.v30i1.14017

Kulmány, I. M., Bede-Fazekas, Á., Beslin, A., Giczi, Z., Milics, G., Kovács, B., Kovács, M., Ambrus, B., Bede, L., & Vona, V. (2022). Calibration of an Arduino-based low-cost capacitive soil moisture sensor for smart agriculture. Journal of Hydrology and Hydromechanics, 70(3), 330–340. https://doi.org/10.2478/johh-2022-0014

Al-Rawi, M. A. M. (2024). Low-cost soil moisture sensors’ assessment for their accuracy after calibration through the gravimetric method. SABRAO Journal of Breeding and Genetics, 56(1), 353–369. https://doi.org/10.54910/sabrao2024.56.1.32

Agustirandi, B., Inayah, I., Aminah, N. S., & Budiman, M. (2024). Analysis comparison, calibration, and application of low-cost soil moisture in smart agriculture based on Internet of Things. TELKOMNIKA Telecommunication Computing Electronics and Control, 22(5), 1221–1230. https://doi.org/10.12928/TELKOMNIKA.v22i5.25703

Rahman, M. M. (2017). Relationships between moisture content and dielectric constant for subgrade and subbase of pavement courses [Tesis de maestría, Universiti Teknologi Malaysia].

Schwamback, D., Persson, M., Berndtsson, R., Bertotto, L. E., Kobayashi, A. N. A., & Wendland, E. C. (2023). Automated low-cost soil moisture sensors: Trade-off between cost and accuracy. Sensors, 23(5), 2451. https://doi.org/10.3390/s23052451

Nagahage, E. A. A. D., Nagahage, I. S. P., & Fujino, T. (2019). Calibration and validation of a low-cost capacitive moisture sensor to integrate the automated soil moisture monitoring system. Agriculture, 9(7), 141. https://doi.org/10.3390/agriculture9070141

ASTM International. (2015). Standard specification for materials for soil-aggregate subbase, base, and surface courses (ASTM D1241).

Secretaría de Comunicaciones y Transportes. (2016). Materiales para subbases (N·CMT·4·02·001/16). Instituto Mexicano del Transporte.

Geldart, D., Abdullah, E. C., Hassanpour, A., Nwoke, L. C., & Wouters, I. (2006). Characterization of powder flowability using measurement of angle of repose. China Particuology, 4(3–4), 104–107. https://doi.org/10.1016/S1672-2515(07)60247-4

Arduino. (2026, 15 de septiembre). Arduino Due: User manual. https://docs.arduino.cc/resources/datasheets/A000062-datasheet.pdf

Triola, M. F. (2009). Estadística (10.ª ed.). Pearson Educación.

Al-Hashemi, H. M. B., & Al-Amoudi, O. S. B. (2018). A review on the angle of repose of granular materials. Powder Technology, 330, 397–417. https://doi.org/10.1016/j.powtec.2018.02.003

Orangi, A., Narsilio, G. A., & Ryu, D. (2019). A laboratory study on non-invasive soil water content estimation using capacitive based sensors. Sensors, 19(3), 651. https://doi.org/10.3390/s19030651

Strypsteen, G., Persson, M., Miroshnychenko, M., & Rakonjac, N. (2026). Field performance and calibration strategies for low-cost capacitive soil moisture sensors. Sensors, 26(11), 3291. https://doi.org/10.3390/s26113291

Sensor

Downloads

Published

2026-11-01

How to Cite

Diaz-Peña., I., Hermosillo-Nevárez., J., Félix-Sámano., A., Zaldívar-Cadena., A., Castro-Rubio., J., & Félix-Medina., J. (2026). Experimental and Statistical Evaluation of the SEN0193 Capacitive Sensor for Moisture Measurement in Granular Materials. RIIIT Revista Internacional de Investigación E Innovación Tecnológica, 14(83), 56-79. https://revistas.uadec.mx/RIIIT/article/view/1323