The use of Arduino as a didactic tool: An approach in the detection of adulterated mezcal
Keywords:
Arduino, Spectrophotometry, Learning Electronics and Lab equipment.Abstract
Mezcal is an alcoholic beverage and is frequently adulterated, causing health problems in the population. Therefore, adulteration of alcoholic beverages is an illegal practice. In addition, equipment to detect adulterated beverages is becoming more expensive, making it inaccessible to most university laboratories interested in testing adulterated alcoholic beverages. In an attempt to solve the problem of identifying adulterated mezcal and avoiding the high cost of laboratory equipment, the objective of this work is to implement a homemade spectrophotometer through a simple methodology, to later identify samples of adulterated mezcal. This work tries to encourage teachers without deep knowledge in electronics and programming, to develop their own laboratory equipment, avoiding paying the high costs of commercial equipment. The Arduino-based home-made spectrophotometer is portable and the degree of detection is comparable to that of commercial equipment. In addition, the programming code for the user control interface is explained in detail. As a result of this work, it was found that the degree of detection of the proposed spectrophotometer is comparable with commercial equipment. Furthermore, the total cost was $100, which is extremely inexpensive compared to the high cost of commercial equipment. Finally, the response of the Arduino-based spectrophotometer is adequate to identify adulterated mezcal samples.
References
1. Gaytán, M. (2019). “Extending authenticity: Going corporate in a craft market”, Poetics, https://doi.org/10.1016/j.poetic.2019.101380
2. Quintero Arenas, M., Meza-Márquez, O., Velázquez-Hernández, J., Gallardo-Velázquez, T. & Osorio-Revilla, G. (2020). “Quantification of adulterants in mezcal by means of FT-MIR and FT-NIR spectroscopy coupled to multivariate analysis”. Journal of Food. 18(1), https://doi.org/10.1080/19476337.2020.1740327
3. Barroso, J., Díez-Buitrago, B., Sa, L., Möller, M., Briz, N., & Pavlov, V. (2018). “Specific bioanalytical optical and photoelectrochemical assays for detection of methanol in alcoholic beverages”. Biosensors and Bioelectronics, 101(1), 116–122. https://doi.org/10.1016/j.bios.2017.10.0221
4. Sisco, E., & Dake, J. (2016). “Detection of low molecular weight adulterants in beverages by direct analysis in real time mass spectrometry”. Analytical Methods, 8(14), 2971. https://doi.org/10.1039/C6AY00292G
5. Lachenmeier, D. W. (2016). “Advances in the detection of the adulteration of alcoholic beverages including unrecorded alcohol”. In G. Downey (Ed.), Advances in food authenticity testing (pp. 565–584). Woodhead Publishing.
6. Solís-Núñez, J. (2008). “Propuesta de instrumentación de un sistema de control para una torre de destilación en la producción del mezcal”. Tesis. Instituto Politécnico Nacional.
7. González-Gutiérrez, J., Pérez-Isidoro, R. and Ruiz-Suárez, J. (2017). “A technique based on droplet evaporation to recognize alcoholic drinks”. Review of Scientific Instruments 88, 074101, https://doi.org/10.1063/1.4991818
8. Huibers, P. and Shah, P. (1997). “Multispectral determination of soap film thickness”, Langmuir, 13, 5995–8, https://doi.org/10.1021/la960738n
9. Sandak, J., Sandak, A., Zitek, A., Hintestoisser, B. and Picchi, G. (2020). “Development of Low-Cost Portable Spectrometers for Detection of Wood Defects”, Sensors, 20,
https://doi.org/10.3390/s20020545J
10. Domínguez, R., Orozco, M., Chávez, G. and Márquez-Lucero A. (2017). “The Evaluation of a Low-Cost Colorimeter for Glucose Detection in Salivary Samples”, Sensors, 17, https://doi.org/10.3390/s17112495J
11. Taha, S., Rafat, G., Aboshosha, F. and Mansour, R. (2017). “Simple Homemade Spectrophotometer”, Journal of Analytical Chemistry, 72, https://doi.org/10.1134/S1061934817020113
12. Lema, M., Aljinovic, E. and Lozano, M. (2006). “Using a homemade spectrophotometer in teaching biosciences”, Biochemistry and Molecular Biology Education, 30, 06-110,
https://doi.org/10.1002/bmb.2002.494030020032
13. Widiatmoko, E., Budiman, M., Mikrajuddin, A. and Khairurrijal, A. (2011). “A simple spectrophotometer using common materials and a digital camera”, Physics Education, 46,
https://iopscience.iop.org/article/10.1088/0031-9120/46/3/014
14. González-Morales, D., Valencia, A., Díaz-Nuñez, A., Fuentes-Estrada, M., López-Santos, O. and García-Beltrán, O. (2020). “Development of a Low-Cost UV-Vis Spectrophotometer and Its Application for the Detection of Mercuric Ions Assisted by Chemosensors”, Sensors, 20, https://doi.org/10.3390/s20030906
15. Daniel, R., Todt, M. and Floyd, H. (2012). “A Low-Cost Quantitative Absorption Spectrophotometer”, Journal of chemical education chemistry, 74, 1432-1435.
https://doi.org/10.1021/ed200829d
16. Quagliano, J. and Marks, C. (2013). “Spectroscopy with Secondary Students: Designing and Using a Custom-Built Spectrometer”. Journal of Chemical Education. 90, 1409–1410,
https://doi.org/10.1021/ed3007499
17. Arbah, Y., Dnane, M. and Ahraoui, T. (2015). “Effect of substrate temperature on structural and optical properties of spray deposited ZnO thin films”. Materials Science-Poland, 33, 491-496, https://doi.org/10.1515/msp-2015-0062
18. Guzmán-Fernández, M., Zambrano de la Torre, M., Ortega-Sigala, J., Guzmán-Valdivia, C., Galvan-Tejeda, I., Crúz-Domínguez, O., Ortiz-Hernández, A., Fraire-Hernández, M., Sifuentes-Gallardo, C. and Durán-Muñoz, H. (2012). “Arduino: a Novel Solution to the Problem of High-Cost Experimental Equipment in Higher Education”, Exp Tech, 45, https://doi.org/10.1007/s40799-021-00449-1
19. Durán-Muñoz, H., Hernández-Ortiz, M., Sifuentes-Gallardo, C., Galván-Tejeda, I., Sánchez-Zeferino, R. and Castaño-Meneses, V. (2018). “Comparative study of kinetic parameters induced by different excitation sources: using a novel and user-friendly glow curve deconvolution spreadsheet”, J Mater Sci: Mater Electron, 29, https://doi.org/10.1007/s10854-018-9226-6
20. Poppe, L., Eliason, H. and Hastings, M. (2004). “A Visual Basic Program to Generate Sediment Grain-Size Statistics and to Extrapolate Particle Distributions”, Computers & Geosciences, 30, 791–795, http://dx.doi.org/10.1016/j.cageo.2004.05.005
