Efectos de los diferentes parámetros y procesos sobre la resistencia al desgaste por deslizamiento de la familia Hastelloy
Palabras clave:
Hastelloy, resistencia al desgaste, tratamiento térmico, corrosión, soldaduraResumen
En este documento se hace una revisión bibliográfica de trabajos de investigación y artículos realizados hasta la actualidad sobre los efectos de diferentes procesos como tratamiento térmico, corrosión, soldadura, y atmosferas controladas, sobre la resistencia al desgaste, con la variación de los parámetros de carga, distancia y velocidad de la familia Hastelloy. Actualmente existe muy poca información sobre el tema, ya que, las investigaciones se concentran principalmente en las propiedades mecánicas de la aleación dejando de lado su resistencia al desgaste. Dependiendo de los distintos parámetros y procedimiento la resistencia al desgaste se ve sumamente afectada tanto positiva como negativamente. Se resaltan las condiciones y procedimientos más relevantes para obtener mejoras en la resistencia al desgaste, además de los mecanismos de desgaste presentes en cada uno.
Referencias
Anandakrishnan, V., Sathish, S., Muthukannan, D., Dillibabu, V., & Balamuralikrishnan, N. (2020). Dry sliding wear behavior of Inconel 718 additively manufactured by DMLS technique. Industrial Lubrication and Tribology. 72(4): 491-
496. DOI: https://doi.org/10.1108/ILT-08-2019-0322
Banamali, D., Mahapatra, T. R., Sahu, P., & Sahu, S. K. (2020). Tribological and electrochemical corrosion performanceanalysis of Hastelloy X under different loading conditions. Materials Today: Proceedings. 24(1): 1434-144. DOI: https://doi.org/10.1016/j.matpr.2020.04.462
Calvin Samuel, S., Arivarasu, M., & Ram Prabhu, T. (2022). High-Temperature Solid Particle Erosion Behavior of Laser Powder Bed Fused Inconel 718. Journal of Tribology. 144(9): 705-720. DOI: https://doi.org/10.1115/1.4054052
Dansana, B., Mahapatra, T. R., Sahu, P., & Sahu, S. K. (2020). Tribological and electrochemical corrosion performanceanalysis of Hastelloy X under different loading conditions. Materials Today: Proceedings. 24(1): 1434-1444. DOI: https://doi.org/10.1016/j.matpr.2020.04.462
Ekambaram, P. (2019). Study of mechanical and metallurgical properties of Hastelloy X at cryogenic condition. Journal of Materials Research and Technology. 8(6): 6413-6419. DOI: https://doi.org/10.1016/j.jmrt.2019.10.048
Faghani, G. (2020). Evaluation of Wear, Oxidation and Corrosion Behaviors of Nickel-Based Superalloy Coatings Fabricated by GTAW Method. Iranian Journal of Surface. Disponible en: https://www.iranjme.ir/article_95986.html. Fecha de consulta: enero 4, 2024
Jinoop, A. N., Denny, J., Paul, C. P., Kumar, J. G., & Bindra, K. S. (2019). Effect of post heat-treatment on the microstructure and mechanical properties of Hastelloy-X structures manufactured by laser based Directed Energy Deposition. Journal of Alloys and Compounds. 797: 399-412. DOI: https://doi.org/10.1016/j.jallcom.2019.05.050
Kesavan, J., & Senthilkumar, V. (2020). Experimental investigations on cryo- machining of Hastelloy C-276 with tool wear characteristics. Sādhanā. 45(1): 1-14. DOI: https://doi.org/10.1007/s12046-020-01477-0
Osmar, C., Pacheco, J. T., Veiga, M. T., Teixeira, M. F., da Silva, L. J., da Costa, C. E., & Milan, J. C. (2022). Effect of Different Heat Treatment Routes on the Tribological Behavior of the Inconel 718 Alloy Deposited on AISI 316 L by Laser Cladding. Lasers in Manufacturing and Materials Processing. 9(2): 1-16. DOI: https://doi.org/10.1007/s40516-022-00166-6
Pauzi, A. A., Ghazali, M. J., Yunus, S. M., Zamri, W. W., Azhari, C. H., & Husin, S. (2018, September). Wear characteristics on gas turbine fuel nozzle-combustion liner contacting surface at different contact temperatures. In Proceedings of Asia International Conference on Tribology 2018. 2018: 40-42. Disponible en: https://books.google.es/books?hl=es&lr=&id=LDFqDwAAQBAJ&oi=fnd&pg=PA40& dq=Wear+characteristics+on+gas+turbine+fuel+nozzle+combustion+liner+contacti ng+surface+at+different+contact+temperatures&ots. Fecha de consulta: 4 enero, 2024
Sathisha, CH. (2018). Materials Solutions to Address High Temperature Fretting Wear in Gas Turbine Combustor Components. In Proceedings of TRIBOINDIA-2018 An International Conference on Tribology. 13(1): 1-7. DOI: https://dx.doi.org/10.2139/ssrn.3397894
Singh, S., Gupta, D., & Kaushal, S. (2020). Dry sliding wear performance of Ni–SiC composites developed through an-in situ microwave casting process. Journal of Tribology. 142(10): 101704-101714. DOI: https://doi.org/10.1115/1.4047032
Sitki, A., Gökkaya, H., Akincioğlu, G., & Karataş, M. A. (2020). Taguchi optimization of surface roughness in the turning of Hastelloy C22 super alloy using cryogenically treated ceramic inserts. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 234(19): 3826-3836. DOI: https://doi.org/10.1177/0954406220917708
Venkatesan, K., Devendiran, S., Nishanth Purusotham, K., & Praveen, V. S. (2020). Study of machinability performance of Hastelloy-X for nanofluids, dry with coated tools. Materials and Manufacturing Processes. 35(7): 751-761. DOI: https://doi.org/10.1080/104 26914.2020.1729990
Wang, J., & Gao, Y. (2019). The stress intensity factor calculation for combined sliding wear and fatigue of GH4169 superalloy based on three-dimensional simulation. Wear. 436(1): 203012. DOI: https://doi.org/10.1016/j.wear.2019.203012
Xia, Y., Chen, H., Liang, X., & Lei, J. (2021). Circular oscillating laser melting deposition of nickel-based superalloy reinforced by WC: Microstructure, wear resistance and electrochemical properties. Journal of Manufacturing Processes. 68: 1694-1704. DOI: https://doi.org/10.1016/j.jmapro.2021.06.074
